Halogen Freon Leak Detector Refrigerant Gas Leakage Tester Elitech WJL-6000

Australian supplier, 1 to 3 days delivery in Australia if needed !!! Elitech WJL-6000S Freon Halogen Leak detector for Refrigerant Gas This Leak Detector is equipped with high sensitivity and visualized alarm display. Its adjustable sensitivity ensures automatic and optimal detection status， locating leaks much more accurate. Its subtle structure, built-in high-precision stabilivolt IC, and ultra-low power consumption circuit design enable much more stable operation and endurable batteries. Features: Detects SF-6 in high-voltage circuit breakers. Detects cleaning agents used in dry cleaning applications. Detects leaks in other systems and storage/recovery containers. Detects Ethylene Oxide gas leaks in hospital sterilizing equipment. Detects halogen gas and most gases that contain chlorine, fluorine, and bromine. Detects all kinds of halogenated refrigerants including but not limited to CFCs, HCFCs, and HFCs. With precise ultra-low power consumption IC design can be automatically adjusted to the best optimum detecting state. Specification: Reset the time: 2-10 seconds Working temperature: 0 °C ~ 52 °C. Maximum sensitivity: 6gr/yr(halogen refrigerants). Battery life: about 50 hours under normal use. Response time: instantaneous Preheating time: about 6 seconds. Operating mode: continuous, unlimited Fixed probe length: 20cm (7.87 inches) Dimension: 22.9 cm x 6.5 cm x 6.5 cm (9.01 x 2.56 x 2.56 inches). Electricity source: DC6V , 4 x AAA batteries(not included) Battery Voltage Instructions: *Green - battery voltage is normal, suitable for work; *Orange - battery voltage is close to the limitation, and needs to replace as soon as possible; *Red - battery voltage is below the acceptable operating level. *LotFancy refrigerant freon leak detector features an automatic circuit and a reset function that set itself to ignore the ambient level of Halogen gas. *Reset The leakage detector, upon initial switch-on, can automatically adjust itself to ignore the present level of Halogen gas in 6s and enter into the best state of detection. *Place the sensing tip near a known leakage area and switch it on, it's easy to find a higher concentration of leakage. Or move to the fresh air and turn it on, adjust to the maximum sensitivity, and any concentration above zero will be detected. *Automatic Circuit: when the detector is in a measuring state, the automatic circuit will follow the changing level of halogen gas to avoid false alarms. Leakage Warning: When gas leakage is discovered, the "di di" sound will become more hurried. More refrigerant freon leak, more rapid. Meanwhile, the indicator light flashes quickly. Package includes: 1 x Halogen leak detector with probe 1 x Instruction manual 1 x Carrying pouch